Home About Us Product Catalog News & Tech-info R & D and design Project Download Contact Us

Products Catalog

Corrugation 68mm x 13mm

Corrugation 76mm x 25mm

Corrugation 150mm x 50mm

Corrugation 300mm x 110mm

Corrugation 380mm x 140mm

Corrugation 200mm x 55mm

Corrugation 400mm x 150mm

Corrugation 75mm x 25mm

Corrugation 125mm x 25mm

Corrugation 68mm x 13mm

Contact Us

The Manufacturer Technology of the Metal Corrugated Pipe

We usually manufacture the metal corrugated pipe according to the specified welding parameter, such as the welding current, arc length, argon flow, welding speeding, then we need to adjust the argonaut welding. Fasten the tube on the welding jig well, then weld it without the weld defect. The sunken of the welding line and aboral staggered edge should be thicker then the plate. Then circle the tube on the tube coiling machine. The last but not least step is the coiling block. The intervals between layer of the metal corrugated pipe should be less or equal to the single layer board. There is not allowed to have the oil, water or dust. 
Metal Corrugated Pipe
Address: Hegang Road, Wuyi Circle Economic Zong, Hengshui City, Hebei Province, China
Tel: + 86 318 5876 109
Fax: +86 318 5876 111

Mobile: +86 186 0318 8333

Copyrights © Hengshui Yitong Pipe Industry Co.,Ltd. All Rights Reserved

Powered by

Home   |  About Us   |  Product Catalog   |  News & Tech-info   |  R & D and design   |  Project   |  Contact Us