Corrugated metal culvert, Corrugated metal pipe,Corrugated metal Pipe culvert manufacturers China
Home About Us Product Catalog News & Tech-info R & D and design Project Download Contact Us

Products Catalog

Corrugation 68mm x 13mm

Corrugation 76mm x 25mm

Corrugation 150mm x 50mm

Corrugation 300mm x 110mm

Corrugation 380mm x 140mm

Corrugation 200mm x 55mm

Corrugation 400mm x 150mm

Corrugation 75mm x 25mm

Corrugation 125mm x 25mm

Corrugation 68mm x 13mm

Contact Us

A Brief Introduction to Corrugated Pipe Culvert

A corrugated pipe culvert is a type of drainage piping that has a corrugated design. Its corrugated design allows water to pass through it while giving it a high strength-to-weight ratio. Its smooth inner wall also makes it easy to connect and has a high flow capacity. These are just a few of the many types of drainage piping available. If you have a unique application that requires the ability to customize your pipe, it may be a good option.

 

Two Common Types of Corrugated Pipe Culverts

There are two common types of corrugated pipe culverts. One type is corrugated HDPE, which is widely used in gravity flow water management systems. This type of piping is lightweight and easy to install. The other type is spiral-connected and is designed for underground structures. Both types are equally suitable for drainage systems, but the corrugated pipe is less costly and easier to maintain. The major difference between these two culverts lies in their internal structure.

 

The Materials

The most common type of corrugated pipe culvert is made of steel or metal. This type is made from semi-circular steel or metal plates. This type of culvert is widely used in bridges and highways because it is strong and durable. It has a compressive strength of fifteen times greater than cement pipe. It is also lightweight, making it easier to install and remove. This type of buried structure is also highly economical.

Corrugated pipes are generally made of carbon steel, and can handle large amounts of load. The types of culverts vary in their load bearing capacity, but most of them are made from galvanized steel. They are typically coated with zinc in a range of 275 to 1200 grams/m2 and are designed for drainage applications. They have a high capacity and are extremely versatile. Depending on the specific application, there are different gages available.

Steel corrugated pipe culverts are lightweight and have the same diameter as cement pipes. They are also available with a full line of accessories. Additionally, corrugated plastic pipe is hot-dip galvanized steel, and has a service life of 80 to 100 years. It is a durable material, and it is easy to install.

 

The Applications

Stainless steel corrugated pipe culverts are a popular choice for highway drainage systems. They can be used in place of circular pipe culverts because of their low cost and easy installation. They are also suitable for a wide range of applications, including culverts on roads, parks, and bridges. It is often used in highway edge drains, gullies, and construction applications.

 

We are a corrugated pipe culvert supplier. Please feel free to contact us if you need them!

Corrugated metal culvert, Corrugated metal pipe,Corrugated metal Pipe culvert manufacturers China
Address: Hegang Road, Wuyi Circle Economic Zong, Hengshui City, Hebei Province, China
Tel: + 86 318 5876 109
Fax: +86 318 5876 111

Mobile: +86 186 0318 8333

Copyrights © Hengshui Yitong Pipe Industry Co.,Ltd. All Rights Reserved

Powered by

Sitemap
Home   |  About Us   |  Product Catalog   |  News & Tech-info   |  R & D and design   |  Project   |  Contact Us