Corrugated metal culvert, Corrugated metal pipe,Corrugated metal Pipe culvert manufacturers China
Home About Us Product Catalog News & Tech-info R & D and design Project Download Contact Us

Products Catalog

Corrugation 68mm x 13mm

Corrugation 76mm x 25mm

Corrugation 150mm x 50mm

Corrugation 200mm x 55mm

Corrugation 300mm x 110mm

Corrugation 380mm x 140mm

Corrugation 400mm x 150mm

Corrugation 68mm x 13mm

Corrugation 75mm x 25mm

Corrugation 125mm x 25mm

Contact Us

Compression Resistance of the Metal Corrugated Pipe

Compression resistance is an important parameter of metal corrugated pipe  performance.

Under the normal temperature, the maximum static pressure that the metal  corrugated pipe can undertake on the basic of without plastic deformation.  Compression resistance actually belongs to the category of the strength of the  metal corrugated pipe. The key to the calculation is stress analysis. Under the  same working condition,the stability of external pressure is better than the  internal pressure, so the maximum compression resistance of the external is  higher than internal.

If the internal cavity is with enough pressure when the both ends are fixed,  the peak of the corrugated pipe has the possibility to blast. Bursting pressure  is the parameter of maximum compression resistance. During the whole working  process, the working pressure is far less than the bursting pressure, otherwise  the metal corrugated pipe will be damaged.

Corrugated metal culvert, Corrugated metal pipe,Corrugated metal Pipe culvert manufacturers China
Address: Hegang Road, Wuyi Circle Economic Zong, Hengshui City, Hebei Province, China
Tel: + 86 318 5876 109
Fax: +86 318 5876 111

Mobile: +86 186 0318 8333

Copyrights © Hengshui Yitong Pipe Industry Co.,Ltd. All Rights Reserved

Powered by

Sitemap
Home   |  About Us   |  Product Catalog   |  News & Tech-info   |  R & D and design   |  Project   |  Contact Us